15–16 September 2027 · BITEC

Valve World Southeast Asia 2027 Stand Construction | Bangkok

Valve makers sell weight and pressure. Forged valves and actuators are heavy, and exhibitors want to show cut-aways and pressure tests. The show moves from Singapore to Bangkok in 2027 and runs beside two wire and tube events.

Quote for this show

Tell us the stand size and equipment. Drawings can follow by email.

01Show facts
Dates
15–16 September 2027
Venue
Bangkok International Trade & Exhibition Centre (BITEC), 88 Bangna-Trad Road (Km.1), Bangna, Bangkok 10260
Halls
Hall 104, per the show's official site.
Organiser
Confirm with organiser. The co-located wire Southeast Asia and Tube Southeast Asia are organised by Messe Düsseldorf Asia.
Exhibitor profile
Valve, actuator, sealing and flow-control manufacturers, EPC contractors and end users in oil and gas, petrochemical, water, LNG and power.
02Technical build requirements

What the structure has to carry at Valve World Southeast Asia

Valve and actuator weight

A large valve is heavy and awkward to lift. We place it on a plated plinth and plan a hoist or forklift route. The hall's permitted loading is not published here; confirm with organiser — we handle this for you.

Confirm with organiser — we handle this for you

Cut-away and test-rig displays

Visitors like to see a valve cycle or a seat test. We build a small bench with a splash tray and guards around any moving or pressurised part, and we confirm what the organiser allows.

Confirm with organiser — we handle this for you

Fluids and compressed air

A live demonstration may use water, oil or air. Services are ordered through the organiser; confirm with organiser — we handle this for you, and we prepare the stand-side manifold and containment.

Confirm with organiser — we handle this for you

Co-located hall traffic

Hall 104 sits alongside two wire and tube events, so delivery windows may be busy. We pre-fabricate so the on-site assembly is short and fits the slot we are given.

Raised meeting level

Large manufacturers often add a deck for project talks. It needs a PE-stamped drawing pack and stability statement; rigging and height limits: confirm with organiser — we handle this for you.

Confirm with organiser — we handle this for you

03Typical stand sizes and budget bands

Inline

18 sqm

Valve plinths and lit shelving

Essential
THB 126,000 – 162,000
USD 3,880 – 4,980
Standard
THB 180,000 – 252,000
USD 5,540 – 7,750
Premium
THB 288,000 – 432,000
USD 8,860 – 13,290

Corner

36 sqm

Test-rig bench with splash tray and guards

Essential
THB 252,000 – 324,000
USD 7,750 – 9,970
Standard
THB 360,000 – 504,000
USD 11,080 – 15,510
Premium
THB 576,000 – 864,000
USD 17,720 – 26,580

Island

54 sqm

Display level and meeting area, with a deck as an optional extra

Essential
THB 378,000 – 486,000
USD 11,630 – 14,950
Standard
THB 540,000 – 756,000
USD 16,620 – 23,260
Premium
THB 864,000 – 1,296,000
USD 26,580 – 39,880

Planning ranges per sqm: Essential THB 7,000–9,000 · Standard THB 10,000–14,000 · Premium THB 16,000–24,000. USD at THB 32.5 = USD 1. Double-deck structures, machinery platforms and rigging are quoted on top of these ranges. Pixelmate Exhibition Co., Ltd. confirms the figure after reviewing your drawings.

04What Pixelmate built here

No published project photograph from this event yet; it arrives in Bangkok for the first time in 2027. We would start from the heaviest item and work outward to the walls.

Pixelmate show guides on pixelmateexpo.com
05Technical FAQ
How do we show a very heavy valve?

A plated plinth spreads the weight, and a planned lift route puts it in place. The permitted loading is confirmed with the organiser before we fix plate sizes.

Can we run a live pressure or leak test?

Possibly, if the organiser's safety rules allow. We design guards, a splash tray and a drain route, and confirm the rules before fabricating.

What does Hall 104 mean for our build?

The hall is shared with two co-located events, so access timing needs care. We pre-fabricate to shorten the assembly time on site.

Is a meeting deck required for EPC buyers?

Many exhibitors add one. It is a double-deck structure requiring a stamped pack, so we plan the drawing deadline into the programme.

How do we get air or water to a demo bench?

Services are ordered through the organiser by capacity. We prepare the bench-side connection so the contractor only needs to link up.

Send your drawings for Valve World Southeast Asia

Pixelmate Exhibition Co., Ltd. reviews the equipment, hall and approval route, then returns a technical estimate.

Upload drawings

Cookies

We use essential storage to run this site and, with your consent, anonymous analytics to improve it. Your enquiry details are only used to respond to your project.